New Cranes

Telescopic Mobile Crane Liebherr LTM 1650-8.1
Maximum lifting capacity: 700 t
Maximum lifting torque: 2117 tm
1. Carrier Equipment
Carrier manufactured by Liebherr, with 8 axles, hydropneumatic suspension Niveaumatik with
automatic level control. Liebherr engine with a power output of 505 kW (688 hp), emissions
compliant with EU regulations (EU) 2016/1628, ECE-R.96 or EPA/CARB, with spark arrestors.
Fitted with an automatic transmission by torque converter and retarder. ECOdrive. Transfer box
with 2 speeds. 18x8 drive. Tires: 385/95 R 25 (14.00 R 25). 2-circuit power steering, rear axle
steering with two modes, manual or automatic. Braking system: 3 separate air circuits, two of
which are brake circuits equipped with anti-lock braking system (ABS). Retarder (Telma). Axle
maintenance reduced to changing the air springs. Independent oil-cooled disc brakes for the
cardan shafts. Independent air conditioning system with pre-programmable heater, air
conditioning. Optional: a radio/CD player with LCD display for cabin climate control and heating.
Hydraulic pinning of the crane on the rear of the crane&rsquo;s transport frame. Towing hitch on the
rear, front of the removable crane frame. Anti-collision alarm. Work lights on the crane frame.
Reception of the crane carrier.
2. Turret Equipment
Slewing ring with roller bearings. Centralized lubrication. The mechanical drive of the rotating
part is ensured by the diesel engine of the carrier chassis. ECOmode. Hydraulic system with
variable displacement pumps. Emergency hydraulic pump control. Oil circuit shut-off with
electrical command for slewing movement, lifting of the main boom, and telescoping in an open
hydraulic circuit. Preparation for lift mechanism type 2 and lift type 3. Slewing mechanism. Oil
cooler with fan. Two work lights adjustable on the base section of the boom and lights on the
turret (lateral and rear). Operator's cab (tiltable up to 20&deg;) equipped with a separate heating unit,
air conditioning, one seat with ventilation and heating, programmable standard radio, and seatmounted
joystick controls. Boom section calibration by computer and tilt sensor. Boom load
monitoring by camera and color display. VarioBallast with 155 t. Load monitoring system (LMB),
load moment indicator, and indication of reactions on all outriggers in automatic mode. System
test. Anemometer. Flashing beacon for aerial signaling. Job site area limitation. Turret reception.
Paint: Chassis carrier with gray basalt rims: RAL 7012, gray basalt
Operator's cab, rotating turret, tip of the boom, and counterweight: RAL 1007, yellow daffodil
3. Base Machine:
&bull; 1000: Base machine without telescopic boom
&bull; 1120: Telescopic boom 16.7 m - 54 m and 17.4 m - 80 m, with 2 transport carriages
(outline for transport)
4. Work Equipment:
&bull; 1200: Telescopic boom guying Y-system
&bull; 1300: Hydraulic telescopic boom extension from 4 m (VE) for increased load lifting
capacity on the telescopic boom (only in connection with equipment position 1200)
&bull; 1400: Telescopic boom extension (VE) from 8 m (only in connection with equipment
positions 1100 or 1120)
&bull; 2100: Bridle with single sheave, additional pulley
&bull; 2200: 91 m variable luffing lattice jib
&bull; 3200: Piece for mounting variable luffing lattice jib
&bull; 4100: Jib (HJ) 4.9 t, 2 auxiliary sheaves
&bull; 4500: Heavy-duty winch (hoist winch 3)
&bull; 4600: 2.5 t auxiliary sheave, double pulley with several options from 3.2 t/4.2 t
&bull; 4700: Auxiliary sheave, 8.9 t, double pulley with several options from 2.1 t/3.5 t
&bull; 4800: Auxiliary sheave, 9.4 t, triple pulley with several options from 2 t/3 t
&bull; 5000: Auxiliary sheave 37.5 t, single pulley with several options from 1.1 t/1.75 t
&bull; 5050: 12.7 t hook
5. Additional Carrier Equipment:
&bull; 5012: Engine shut-off valve with intake shut-off, including protection against surge, with
emergency stop button at the base of the boom and turret cabin position
&bull; 5100: Emergency button "punch" in operator's cab and turret cabin
&bull; 5150: 8.25 R 25 (16.00 R 25) Michelin tires
&bull; 5160: Spare wheel 445/95 R 25 (16.00 R 25, Michelin, without support)
&bull; 5540: Additional rear outrigger cylinder for autonomous mounting of the counterweight
box
&bull; 5588: 4 metal distribution plates, 3.5m x 2.4m
&bull; 6111: Long-range headlights
&bull; 6131: Fourth beacon light
&bull; 6335: 12 V power outlet in the driver's cabin
&bull; 6511: Underrun protection bar
6. Additional turret equipment:
&bull; 7051: Additional hydraulic oil cooler
&bull; 7320: Additional counterweight of 20 t (for a total of 175 t)
&bull; 7335: 8 plates of 5 t each instead of 4 x 10 t for better weight distribution during
transport
&bull; 8101: Work light at the top of the boom
&bull; 8310: Camera and color screen system for boom head and additional equipment
(if ordered)
&bull; 8335: 12 V power outlet in the turret cabin
&bull; 8401: Use of the carrier hydraulic circuit for emergency turret control
Colors:
&bull; 9010: Special two-color paint
&bull; 9060: Custom inscriptions

Cranes

All Terrain Cranes

Used Cranes

General Specifications:
Year: 2018
Manufacturer: Liebherr
Model: LTM 1500-8.1
Tonnage: 500t | 550 US
Boom Length: 84m | 275&rsquo;
Jib: 91m Luffing | 300&rsquo; Luffing
Winch Count: 3
Hook/Block: Ball &amp; Block
Counterweight: 165t | 363,762 lbs.
Hours Upper: 5,570
Chassis
Engine: D9508.A7
Transmission: ZF-transmission
Hours Lower: TBD
KM/Miles: 14,573 km | 9,055 miles
Tire Size: 445/95/R25
Drive Standard: 16 x 8 x 12
Add Options: TBD

Earthmoving and material handling technology

Construction

Attachments

Quick coupler

General Specifications:&nbsp;&nbsp; &nbsp;
&nbsp;
Year: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2021
Manufacturer: &nbsp;&nbsp;&nbsp; Liebherr
Model: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LR 1250
Tonnage: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 250t | 275 US
Boom Length: &nbsp;&nbsp;&nbsp; 50 m | 164&rsquo;
Jib: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 35m | 114&rsquo;
Winch Count: &nbsp;&nbsp;&nbsp;&nbsp; 1
Hook/Block: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 12t, 40t, 100t | 13.2, 44, 110 US ton
Counterweight: &nbsp; 118.2t | 260,586 lbs.
Hours Upper:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2,493
Add Options: 
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 
Basic machine
&nbsp;
1) basic machine LR 1250.1, 230 kW, level V, with 118,2 t counterweights
2) main winch 12 t without free fall, 26 mm
3) rotation resistant hoist rope 420 mm, 26 mm, 1960 N7mm2
4) rotation resistant hoist rope 495 mm, 26 mm, 1960 N7mm2
5) Colouring in Liebherrr design
6) single hook 12,5 t (26 mm)
7) hook block 40 t with 1 sheave (26 mm)
8) hook block 100t with 5 sheaves (26 mm)
&nbsp;
&nbsp;
Main boom
&nbsp;
9) length main boom 50 m, consisting of
9.1) boom base section 10 m for steel handrails (2320.25)
9.2) boom spacer 3 m incl. steel handrails (2320.23)
9.3) boom spacer 6 m incl. steel handrails (2320.23)
9.4) boom spacer 12 m incl. steel handrails (2320.23)
9.5) boom head 7m, 3+10 sheaves, incl. steel handrails (2320.23)
10) two fall fly boom for main boom (1311, 1512, 2017, 2018, 2220, 2320, 2821)
11) fly boom retrofit kit 3-fall for main boom (1311, 1512, 2017, 2018, 2220, 2320, 2821)
&nbsp;
Adjustable fly jib
&nbsp;
12) length of the adjustable fly jib 35m, consisting of:
12.1) fly jib (adjustable), base section 7m incl. steel handrails with A-frames (1916.xx)
12.2) fly jib (adjustable), spacer 3 m incl. steel handrails (1916.xx)
12.3) fly jib (adjustable), spacer 6 m incl. steel handrails (1916.xx)
12.4) fly jib (adjustable), spacer 12 m incl. steel handrails (1916.xx)
12.5) fly jib (adjustable) head 7m incl. steel handrails with 1+3 rope sheaves (1916.xx)
13) single stranded fly jib for fly-jib (adjustable): 1008, 1309, 1713, 1916
14) intermediate retaining rope fly-jib (1916) &gt;= 47m (incl. rope)
15) adjustable winch 10 t for fly-jib (1713, 1916, 2316)
&nbsp;
Boom equipment
&nbsp;
16) boom catwalk 3 m incl. fall security
17) boom catwalk 6 m incl. fall security
18) boom catwalk 12 m incl. fall security
19) boom catwalk boom head incl. fall security
20) boom catwalk rope guide incl. fall security
21) additional safety harness for 1 person
22) rope guide &gt;= 20 m
&nbsp;
Application package
&nbsp;
23) Litronic operating mode raising
24) 2 hook operations (adjustable fly jib)
&nbsp;
LiDAT
&nbsp;
25) LiDAT Plus
self-assembly
27) jack-up system standard
28) rope winch
29) self-assembly system counterweight
30) self-assembly cylinder
31) hydr. track adjustment
&nbsp;
Service package
&nbsp;
32) central lubrication swing bearing storage
33) electrical fuel pump (AdBlue)
Additional safety package
34) rear view camera + lateral view camera, basis system
35) winch camera
36) engine zoom camera at boom head with additional foot control
37) roof railing at revolving structure foldable
38) Litronic LMB (main boom)
39) Litronic LMB (fly-jib adjustable 1713.xx, 1916.xx)
40) Litronic height of lift display for both winches
41) Litronic skeleton service control
42) Litronic horizontal load path (HLP)
43) flight warning light
44) mechanical angle display
45) Litronic workspace boundary
driver comfort
46) additional access ladder
47) brighter LED spotlights
48) air-condition
49) hydraulic inclined cabin
&nbsp;
&nbsp;
*Engine tag will be changed to meet US EPA Standards*

Crawler Cranes - Lattice Boom

Crawler Cranes

2006 Liebherr LTM 1500-8.1
Configuration Main Boom + 91 m Luffing fly jib +165 Cwt _ R00
<ul>
<li>ALL-TERRAIN CRANE (LTM 1500-8.1 with Hook Block, 3 sheeves + Supperlift + Sapre tyre) Fleet # 170 1</li>
<li>1 Counter weight Base plate 1 15.00</li>
<li>2 Winch (Hoist II) 1 23.00</li>
<li>3 Ball hook 1 0.70</li>
<li>4 Hook Block - 7 sheeves 1 3.20</li>
<li>5 Counter weight plate 6 15.0</li>
<li>6 Counter weight Side 4 15.0</li>
<li>7 N-adaptor +Luffing jib bottom section G9 1 14.00</li>
<li>NA - Luffing jib boom insert G4 - 14m 1 2.60</li>
<li>NI - Luffing jib boom insert G7 - 14m 1 2.50</li>
<li>NA - Luffing jib boom insert G4 - 14m 1 2.60</li>
<li>NI - Luffing jib boom insert G7 - 14m 1 2.50</li>
<li>NA - Luffing jib boom insert G3 - 7m 1 3.00</li>
<li>NI - Luffing jib boom insert G6 - 7m 1 2.00</li>
<li>11 Luffing jib boom reducer G5 - 3.5m 1 1.00</li>
<li>12 Luffing jib boom insert G8 + wheels bogi 1 5.00</li>
<li>13 Tool box 1 5.00</li>
<li>14 TN/TF Adapter mechanism 1 2.28</li>
<li>15 TF Adapter 1 2.70</li>
<li>16 Spacer for luffing jib (Y) 1 0.50</li>
<li>17 Eccenter 1 3.60</li>
</ul>

Liebherr Search Results for Used Heavy Equipment (234)

Price on Request

Price on Request

Price on Request

Price on Request

Price on Request